Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Open circuit
• If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
- TP sensor terminal A and PCM terminal 2W
- TP sensor terminal B and PCM terminal 2AE
- TP sensor terminal C and PCM terminal 2AA
Short circuit
• If there is continuity, there is a short circuit. Repair or replace the wiring harness.
- TP sensor terminal A and body GND
- TP sensor terminal B and power supply
- TP sensor terminal C and power supply
- TP sensor terminal C and body GND
MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE
(IAT) SENSOR REMOVAL/INSTALLATION [Z6]
1. Remove the battery cover. (See
2. Disconnect the negative battery cable.
3. Perform the following procedure for easier access
(1) Remove the battery box. (See
4. Remove the MAF/IAT sensor.
Downloaded from
BATTERY REMOVAL/INSTALLATION
BATTERY REMOVAL/INSTALLATION
https://carmanualshub.com/
[Z6].)
[Z6].)
- automotive repair manuals website
B3E014013215W02