Fuel Pump Cap Removal Note; Fuel Pump Cap Installation Note - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes

Fuel Pump Cap Removal Note

Caution
• The fuel pump cap could be damaged if the SST is used with any gap between the cap and the
SST. Securely attach the SST so that there is no gap between the SST tabs and the side of the
cap.
1. Remove the fuel pump cap using the SST.

Fuel Pump Cap Installation Note

Note
• The fuel pump unit will rotate and cannot be secured in the specified position if there is any
gasoline on the gasket. Thoroughly wipe away all gasoline from the gasket.
1. Align the fuel tank and fuel pump unit alignment marks as shown in the figure.
2. Set the SST as shown in the figure.
3. Using the SST, tighten the fuel pump cap within the specified tightening torque without shifting the
alignment marks.
Downloaded from https://carmanualshub.com/ - automotive repair manuals website