Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
22. Tighten the exhaust camshaft sprocket lock bolt.
Tightening torque
69-75 N·m
{7.1-7.6 kgf·m, 50.9-55.3 ft·lbf}
23. Remove the SST from the camshaft.
24. Remove the SST from the block lower blind plug.
25. Rotate the crankshaft clockwise two turns until the TDC position.
• If not aligned, loosen the crankshaft pulley lock bolt and repeat from Step 14.
26. Apply silicone sealant to the engine front cover upper blind plug.
27. Install the following parts.
(1) New engine front cover upper blind plug.
Tightening torque
8.0-11.5 N·m
{81.6-117.2 kgf·cm, 70.9-101.7 in·lbf}
Downloaded from
https://carmanualshub.com/
- automotive repair manuals website