Fuel Injector Removal Note [Lf] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Fuel injector
4
(See Fuel Injector Installation Note
7. Install in the reverse order of removal.
8. Inspect all related parts by performing "AFTER SERVICE PRECAUTION". (See
PRECAUTION.)

Fuel Injector Removal Note [LF]

Caution
• Use of a deformed injector clip will cause the fuel injector to be connected incorrectly and could
result in fuel leakage. It will also cause the injector to rotate. Therefore, always replace the clip
when the injector is removed.
1. Insert a flathead screwdriver between the injector cup and clip finger.
Note
• When pushing the clip finger outward, deform the finger until it is removed completely from the
cup notch.
2. Push the clip finger outward using a flathead screwdriver.
3. Remove the injector with the clip.
4. Remove the clip from the fuel injector using the following procedure:
Note
• The clip will not be reused.
(1) Hold the clip using pliers.
Downloaded from
[LF].)
https://carmanualshub.com/
AFTER SERVICE
- automotive repair manuals website