Mazda 3 Workshop Manual page 304

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Diagnostic procedure
STEP INSPECTION
VERIFY FREEZE FRAME DATA
HAS BEEN RECORDED
1
• Has FREEZE FRAME DATA been
recorded?
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
• Verify related service repair
2
information availability.
• Is any related repair information
available?
INSPECT TP SENSOR
CONNECTOR
• Turn the ignition switch off.
3
• Verify that the TP sensor connector
is connected securely.
• Is connector normal?
INSPECT POOR CONNECTION OF
TP SENSOR CONNECTOR
4
• Disconnect the TP sensor
connector.
Downloaded from
Yes Go to the next step.
Record the FREEZE FRAME DATA on the repair
No
order, then go to the next step.
Perform repair or diagnosis according to the available
repair information.
Yes
• If the vehicle is not repaired, go to the next step.
No Go to the next step.
Yes Go to the next step.
No Connect the connector securely, then go to Step 11.
Yes Repair or replace the terminal, then go to Step 11.
No Go to the next step.
https://carmanualshub.com/
ACTION
- automotive repair manuals website