Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Camshaft
1
(See
Camshaft Removal
(See
Camshaft Installation
Cylinder head
2
(See
Cylinder Head Removal
(See
Cylinder Head Installation
3 Cylinder head gasket
Camshaft Removal Note
Note
• The cylinder head and the camshaft caps are numbered to be reassembled in their original
position correctly. When removed, keep the caps with the cylinder head they were removed from.
Do not mix the caps.
1. Loosen the camshaft cap bolts in 2-3 passes in the order shown in the figure.
Cylinder Head Removal Note
1. Loosen the cylinder head bolts in 2-3 passes in the order shown in the figure.
Cylinder Head Installation Note
1. Measure the length of each cylinder head bolt.
• Replace any that exceeds maximum length.
Downloaded from
Note.)
Note.)
Note.)
Note.)
https://carmanualshub.com/
- automotive repair manuals website