Generator Removal Note; Generator Removal/Installation [Lf] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
1 Terminal B cable
2 Generator connector
Generator
3
(See Generator Removal

Generator Removal Note

1. Remove bolt A with the generator since there is not enough space.

GENERATOR REMOVAL/INSTALLATION [LF]

Warning
• When the battery cables are connected, touching the vehicle body with generator terminal B will
generate sparks. This can cause personal injury, fire, and damage to the electrical components.
Always disconnect the battery negative cables before performing the following operation.
1. Remove the battery cover. (See
2. Disconnect the negative battery cable.
3. Remove the under cover and splash shield as a single unit.
4. Remove the plug hole plate. (See
5. Position the drive belt out of the way. (See
Downloaded from
Note.)
BATTERY REMOVAL/INSTALLATION
PLUG HOLE PLATE REMOVAL/INSTALLATION
DRIVE BELT REPLACEMENT
https://carmanualshub.com/
[LF].)
[LF].)
- automotive repair manuals website
B3E011718300W02
[LF].)