Exhaust System[Lf]; Exhaust System Inspection [Lf]; Exhaust System Removal/Installation [Lf] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes

EXHAUST SYSTEM[LF]

EXHAUST SYSTEM INSPECTION [LF]

1. Start the engine and inspect each exhaust system component for exhaust gas leakage.
• If there is leakage, repair or replace the appropriate component.

EXHAUST SYSTEM REMOVAL/INSTALLATION [LF]

Warning
• A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until
they are cool before removing the exhaust system.
1. Remove the plug hole plate. (See
2. Remove the battery cover and battery duct. (See
3. Disconnect the negative battery cable.
4. Remove the under cover.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
Downloaded from
PLUG HOLE PLATE REMOVAL/INSTALLATION
BATTERY REMOVAL/INSTALLATION
https://carmanualshub.com/ - automotive repair manuals website
B3E011500115W03
B3E011500115W04
[LF].)
[LF].)