Crankshaft Pulley Lock Bolt Installation Note - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
3. Turn the crankshaft clockwise until the crankshaft is in the No.1 cylinder TDC position (until the balance
weight is attached to the SST).
4. Hold the crankshaft pulley using the SSTs.
Downloaded from https://carmanualshub.com/
Crankshaft Pulley Lock Bolt
Installation Note
1. Install the SST on the camshaft as shown in
the figure.
2. Install the M6 x 1.0 bolt in by hand.
- automotive repair manuals website