Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Crankshaft pulley lock bolt
1
(See
Crankshaft Pulley Lock Bolt Removal
(See
Crankshaft Pulley Lock Bolt Installation
2 Crankshaft pulley
Front oil seal
3
(See
Front Oil Seal Removal
(See
Front Oil Seal Installation
Crankshaft Pulley Lock Bolt Removal Note
1. Remove the cylinder block lower blind plug.
2. Install the SST.
3. Turn the crankshaft clockwise until the crankshaft is in the No.1 cylinder TDC position (until the balance
weight is attached to the SST).
Downloaded from
Note.)
Note.)
Note.)
Note.)
https://carmanualshub.com/
- automotive repair manuals website