Uplink Ports On Acx1000 And Acx1100 Routers; T1/E1 Ports; Figure 13: Front Panel Of The Dc-Powered Acx1100 Router - Juniper acx1000 User Manual

ACX1000 and ACX1100 Universal Access Router
Related
Documentation

Uplink Ports on ACX1000 and ACX1100 Routers

T1/E1 Ports

32

Figure 13: Front Panel of the DC-Powered ACX1100 Router

1 2 3
CONSOLE/AUX
12 11 10 9
1— DC terminals
2— Management Ethernet port
3— Alarm contact port
4— GE
Gigabit Ethernet ( ) ports
5— Combination Gigabit Ethernet RJ-45 ports
6— ESD point
ACX1000 and ACX1100 Universal Access Router Overview on page 3
ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping on page 5
LEDs on ACX1000 and ACX1100 Routers on page 35
Unless otherwise specified, the information about uplink ports applies to both ACX1000
and ACX1100 routers.
TIP: You can find information about the pluggable transceivers supported
on your Juniper Networks device by using the Hardware Compatibility Tool.
In addition to transceiver and connector type, the optical and cable
characteristics—where applicable—are documented for each transceiver.
The Hardware Compatibility Tool allows you to search by product, displaying
all the transceivers supported on that device, or category, displaying all the
transceivers by interface speed or type. The Hardware Compatibility Tool is
located at https://pathfinder.juniper.net/hct/
T1/E1 Ports on page 32
Gigabit Ethernet RJ-45 Ports on page 33
Gigabit Ethernet SFP Ports on page 34
The ACX1000 router has eight T1/E1 ports located on the front panel.
describes the ports in more detail.
4
GE
0/0/4 0/0/5 0/0/6 0/0/7
0/0/0 0/0/1 0/0/2 0/0/3
8
7— Combination Gigabit Ethernet SFP ports
8— External clocking ports
9— Console or auxiliary port
10— USB port
11—
System (
12— Grounding terminals
.
5 6
0/1/2 0/1/3
0/1/0 0/1/1
COMBO PORTS 0/1/0 0/1/1 0/1/2 0/1/3
7
SYS
) LED
Table 7 on page 33
Copyright © 2017, Juniper Networks, Inc.