ACX1000 and ACX1100 Universal Access Router Hardware Guide
LEDs on ACX1000 and ACX1100 Routers
System LED on the Front Panel
T1/E1 Port LEDs
12
Unless otherwise specified, the information about LEDs applies to both ACX1000 and
ACX1100 routers.
System LED on the Front Panel on page 12
T1/E1 Port LEDs on page 12
Ethernet Port LEDs on page 13
SFP Port LEDs on page 13
Management and Console Port LEDs on the Front Panel on page 13
One bicolor LED labeled
SYS
describes the system LED in more detail.
Table 5: System LED on the Front Panel
Label
Color
Green
SYS
Red
The front panel of the ACX1000 router has eight T1/E1 ports, each with one pair of port
LEDs.
Table 6 on page 12
describes the LEDs in more detail.
Table 6: T1/E1 Port LEDs
Name
Location
Link
Left
Link
Right
(remote
alarms)
indicates the status of the router.
State
Description
Blinking
Router is transitioning online.
On steadily
Router is functioning normally.
Blinking
Router has reported an alarm.
On steadily
Router has failed.
Color
Description
Green
Online with no alarms or failures.
Red
Active with a local alarm; router has detected a
failure.
–
Not enabled.
Yellow
Online with alarms for remote failures.
Table 5 on page 12
Copyright © 2013, Juniper Networks, Inc.