Time Loss From Power Outage; Td7 Automatic Rediscover And Automatic Hardware Reboot - Trane IntelliPak with Symbio 800 Programming Manual

Troubleshooting

Time Loss from Power Outage

If the time is lost following a power outage, the Symbio™ 800 battery likely needs to be replaced.
The Symbio™ 800 may retain the time even with a dead battery for power cycles less than several
seconds.
Note: The Symbio™ 800 coin cell tray should never be taken out unless the Symbio™ 800 is

TD7 Automatic Rediscover and Automatic Hardware Reboot

When performing one or more of the following actions listed below, a message will appear on the
screen that the TD7 is updating data
Automatic rediscovery (Updating data):
•
•
•
•
•
Automatic restart of TD7:
This will occur when modifying security settings: when a first and last user is added and deleted
(enables, disables security), or when the restarts.
Figure 65. Automatic rediscover and automatic restart messages
104
powered on or the Symbio™ 800 needs to be powered on shortly after replacing the battery.
Failure to do this may shorten the battery life.
Add a new point
Remove a point
Rename a point
Modify Display Preferences or Language (from TU)
Modify Custom Report or Header Data Point (from TU)
(Figure 65, p. 104).
Automatic rediscover:
This message appears
when data is being
updated.
Automatic restart:
This message appears
whenever a user is
added or deleted.
RT-SVP011E-EN