Trane IntelliPak with Symbio 800 Programming Manual page 51

Table 17. Service settings (continued)
Value
Temp. Control Staging Integral Time
Heat
Temp. Control Staging Deadband
Heating
Heating Modulating Prop Gain
Heating Modulating Integral Time
Temperature Control Modulating
Deadband
Condenser Fan Control Feedforward
Gain
Condenser Fan Control Integral Gain
Condenser Fan Damping Coefficient
Condenser Reheat Staging
Proportional Gain
Condenser Reheat Staging Int Time
Condenser Fan Staging Deadband
Condenser Reheat Modulation Prop
Gain
Condenser Reheat Mode Integral Time 90.0 Sec (0.1-3600.0)
Suction Superheat Proportional Gain
Suction Superheat Integral Time
Suction Superheat Derivative Time
Suction Pressure Proportional Gain
Suction Pressure Integral Time
Suction Pressure Tracking Time
Evap. Coil Frost Limit Proportional Gain 3.600 (0.100-20.000)
Evap. Coil Frost Limit Integral Time
Evap. Coil Frost Delta
Evap. Coil Frost Threshold
Superheat High Limit
Compressor Discharge Sat Temp. Limit
Proportional Gain
Compressor Discharge Sat Temp. Limit
Integral Time
Compressor Discharge Sat Temp. Limit
Activation Band
Compressor Discharge Pressure Limit
Unload Setpoint
Compressor Discharge Press Limit
Hold Setpoint
Compressor Speed Range Limit Slew
Rate
CIPD Mod Limit Proportional Gain
CIPD Mod Limit Integral Time
Hot Gas Bypass Pressure Ratio
Proportional Band
Hot Gas Bypass Proportional Band
RT-SVP011E-EN
Factory Default (Range)
50.0 Sec (0.1-3600.0)
1.0 °F (0.0-36.0)
1.800 (0.100-100.000)
100 Sec (1-3600)
2.0 °F (0.0-180.0)
1.000 (0.000-1.000)
1.000 (0.000-1.000)
10.000 (0.000-100.000)
6.000 (0.100-100.000)
50.0 Sec (0.1-3600.0)
4.5 °F (1.8-9.0)
3.600 (0.100-100.000)
0.018 (0.000-0.200)
80.0 Sec (0.0-200.0)
30.0 Sec (0.0-60.0)
2.000 (0.000-10.000)
20.0 Sec (0.0-200.0)
10.0 Sec (0.0-200.0)
60 Sec (1-600)
8.0 °F (3.0-20.0)
28.0 °F (25.0-35.0)
55.0 °F (50.0-65.0)
2.0 (0.1-20.0)
60.0 Sec (1.0-600.0)
5 °F (3.0-18.0)
97.0% (85.0-105.0)
85.0% (75.0-90.0)
60 (10-120)
0.500 (0.100-2.000)
30 Sec (1-600)
0.500 (0.100-1.000)
7.0 °F (1.0-20.0)
TD7 Display
Description
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
Contact Trane Technical Support.
51