Trane IntelliPak with Symbio 800 Programming Manual page 58

TD7 Display
Immediately following these tables there is an example of placing a component into manual
override which is representative of the process for interacting with any of the components from this
list.
Table 21. Complete list of manual override selections – unit button
(a) Manual Override Control of Heating outputs are setup in Stop mode, and will be turned On only in Auto mode.
58
Supply Fan Manual Override
Auto / Manual
Outdoor Air Damper Manual
Override
Auto / Manual
Energy Consumption Reset
XXXX kWh
Alarm Relay Manual Override
Auto / Off / On
(a)
Gas Heat Modulating Manual
Override
Auto / Manual
(a)
Electric Heat Modulating
Manual Override
Auto / Manual
Page 1
Relief Fan Manual Override
Auto / Manual
Relief Air Damper Manual
Override
Auto / Manual
Reheat Pumpout Relay Manual
Override
Auto / Manual
Page 2
VAV Box Relay Manual Override
Auto / Off / On
(a)
Gas Heat Staged Manual
Override
Auto / Manual
(a)
Electric Heat Staged Manual
Override
Auto / Manual
Return Fan Manual
Override
Auto / Manual
VOM Relay Manual
Override
Auto / Off / On
RT-SVP011E-EN