Analog Overrides - Trane IntelliPak with Symbio 800 Programming Manual

TD7 Display
Override Value Setting Area
This area contains buttons that when pressed, change the override status. The button that is active
has a shaded appearance in color. The exception is analog points, which require manually entering
a value.
Temporary Override Area
This area allows you to set up a temporary override.
Action Area
This area allows you to apply, save, or cancel edits made to the point override.
Releasing an Override
Touch the Release Override button to release the current override. This action returns you to the
Override Summary screen.
Note: If a point is under a higher priority control, you can still proceed with releasing the override.

Analog Overrides

The Analog Override screen contains up and down arrows in the Override setting area, as well as
a keypad icon that when touched, opens the Analog Keypad.
Use the up and down arrow buttons to select a value. Touch the Apply or Save button to retain your
changes. To manually enter a value, touch the keypad icon.
Figure 18. Displaying the analog keypad screen
Touch the keypad icon to open the Analog
keypad screen. 

Enter a value by tapping the numerals on the
keypad. Touch Enter to save and return to the
Override screen.
Analog Keypad Screen
22
However, it will not take effect until the higher priority level is removed in Tracer® TU,
Tracer® SC+, or Tracer® Ensemble™.
Keypad Icon
RT-SVP011E-EN