Unit - Trane IntelliPak with Symbio 800 Programming Manual

TD7 Display
Figure 25. TGP2 Programs screen

Unit

Touch the Unit button to view Unit status information in the table below.
The data presented in this table is unit configuration dependent.
Table 1.
Unit
Occupancy Status
Timed Override Timer Active
Timed Override Bypass Timer
Cooling Capacity Status
Heating Capacity Primary Status
Heat Cool Mode Status
Supply Fan Run Command
Supply Fan Speed Status
Supply Fan Speed Command
Discharge Air Temperature Active
Outdoor Air Damper Position
Duct Static Pressure Active
Occupancy Input Active
Occupancy Request Active
Occupancy Changeover
Relief Fan Speed Status
Return Plenum Pressure
Relief Air Damper Position
Space Static Pressure Active
28
Unit status
RT-SVP011E-EN