Bottom Display Area; Alarms; Alarm Screens - Trane IntelliPak with Symbio 800 Programming Manual

TD7 Display
Main display are buttons:

Bottom Display Area

The bottom display area contains functional buttons that provide a link to the appropriate screen.

Alarms

Equipment level alarms appear on the TD7 display immediately upon detection. Touch the Alarms
button in the bottom display area to view the Alarms screen.

Alarm Screens

When an alarm is present, the Alarm button at the bottom of the TD7 screen will flash. Press this
alarm button to display all active alarms. Some alarms will clear automatically and will be removed
from this screen. Other alarms require you to press the Reset Alarms button to manually clear the
14
Touch this button to view the status of unit features.
Touch this button to view the status of ventilation components.
Touch this button to view the status of the cooling components.
Touch this button to view the status of heating components.
Touch the information icon to view hardware part numbers and software version
numbers.
Touch this button to access the adjust the date and time.
Touch this button to access Custom Report 1.
Screen brightness settings. Set the brightness to 30%, 60%, 90% display back light
brightness.
Touch this button to open the Alarms screen. When an alarm is present, this button will
flash.
Touch this button to navigate to the Reports screen.
Touch this button to open the Data Graphs screen.
Touch this button to open the Settings screen, which contains options for manual
controls, Feature settings, Binding, Unit Settings, and display settings.
Language selection: Touch this icon to select a language that will be displayed on all
screens.
RT-SVP011E-EN