Removing And Installing Shift Mechanism (Rapid) - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
1.11 Removing and installing shift mecha‐
nism (Rapid)
Special tools and workshop equipment required
♦ Release tool - T30098- (2 pieces)
♦ Grease - G 000 450 02-
1.11.1 Removing
Note
After the battery earth strap is disconnected and connected, carry
out additional operations ⇒ Electrical System; Rep. gr. 27 .
– Remove battery and battery tray ⇒ Electrical System; Rep.
gr. 27 .
– Remove air filter ⇒ Engine; Rep. gr. 23 or ⇒ Engine; Rep.
gr. 24 .
– Remove circlip -3- for shift cable from gearbox shift lever -1-.
– Pull off shift cable from the stud -arrow-.
– Remove circlip -4- for the selector cable from relay lever -2-.
– Pull off the selector cable from the stud -arrow-.
– Remove Bowden cable support -arrows-.
– Remove gearshift knob and shift lever collar
– Remove the centre console ⇒ Body Work; Rep. gr. 68 .
– If present, remove noise insulation from shift housing.
– Unscrew nuts -arrows- attaching the shift housing.
– Remove pre-exhaust pipe ⇒ Engine; Rep. gr. 26 .
94
⇒ page 80 .