Skoda Fabia II 2007 Workshop Manual page 149

1 - Clutch housing
❑ repairing ⇒ page 126
2 - Cylindrical-roller bearing
❑ with circlip
❑ removing ⇒ page 147
❑ installing ⇒ page 147
❑ Fitting position: The cir‐
clip in the bearing points
towards the output shaft
3 - Output shaft
❑ if an inner ring is fitted as
a bearing assembly for
the cylindrical-roller
bearing -Pos. 2-, it can‐
not be removed from the
output shaft
❑ Inspect bearing assem‐
bly or inner ring for cy‐
lindrical-roller bearing
for scoring and damage
❑ Replace output shaft
and cylindrical-roller
bearing together if there
is scoring or damage on
the bearing assembly or
inner ring
4 - 4th gear pinion
❑ Fitting position: Collar
points to the 3rd gear
⇒ page 148
5 - Circlip
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
6 - Circlip
❑ always replace ⇒ Electronic Catalogue of Original Parts
7 - 3rd gear pinion
❑ Fitting position: Collar points to the 4th gear
8 - Circlip
❑ always replace ⇒ Electronic Catalogue of Original Parts
9 - 2nd gear sliding gear
10 - Needle bearing
❑ 2. gear
11 - Inner ring for 2nd gear
❑ check for wear ⇒ page 148
❑ Fitting position ⇒ page 148
12 - Outer ring for 2nd gear
❑ place onto the inner ring -Pos. 11-
❑ replace if there are any traces of scoring or friction
❑ Fitting position ⇒ page 148
13 - 2nd gear synchronizer ring
❑ check for wear ⇒ page 148
❑ Fitting position ⇒ page 148
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
⇒ page 148
145
2. Output shaft