Summary Of Components - Control Cables - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
Removing and installing lock washer
– When removing and installing the circlip -A- pull the gearshift
lever in the -direction of the arrow A- while simultaneously
pressing the spring down with a screwdriver up to the stop in
the -direction of the arrow B-.
Note
The mounting slot in shift lever for circlip must be visible.
♦
Release spring carefully.
♦
Removing and installing damping -arrow-
– Press the pressure spring arm -A- as far as possible to the left
until it is located outside the damping -arrow-.
– Press the shift lever to the lift and pull off the damping.
• After installing the damping, the pressure spring arms -A- and
-B- must rest on the damping -Pfeil-.
1.8

Summary of components - Control cables

Note
Grease bearing and friction surfaces with grease - G 000 450 02- .
84
Rep. gr.34 - Controls, housing