Skoda Fabia II 2007 Workshop Manual page 54

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
– Unhook the tension spring e.g with hook - 3438- .
Note
Only observe the right part of the fig. -arrows- when installing.
Unlock the actuating rod/master cylinder from the clutch pedal as
follows:
– Pull clutch pedal slightly into the passenger compartment.
– Press together both sides of the support using the pliers -
T10005- -arrows-.
– Remove the bearing bolt for the clutch pedal.
– Turn the bearing bolt for the clutch pedal to the left
-in direction of arrow-, for this purpose use the hexagon socket
wrench -1-, wrench size 8 mm.
While doing so, the catches -A- are destroyed.
Then the bolts -B- are positioned horizontally.
– Subsequently move the clutch pedal so that the bearing bolt
can be pulled out.
– Remove clutch pedal from bracket.
Install
• Install the clutch pedal with a new bearing bolt.
• The support -2- must be located on the actuating rod -1- of the
master cylinder.
– Insert a new bearing bolt in the bracket and the clutch pedal.
50