Skoda Fabia II 2007 Workshop Manual page 44

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
– Unscrew the two lower fixing nuts -arrows-.
– Remove the bracket -A- from the front wall -B-.
1.9.2 Install
Installation is performed in the reverse order, pay attention to the
following points:
Note
Position self-locking nuts -1- and -2- for bracket -3- on front wall.
– Install the clutch pedal switch - F36-
– If present, install the crash strut
– Install the footwell vent ⇒ Heating and Air Conditioning; Rep.
gr. 87 .
Vehicles with start-stop system
– Insert the clutch position sender - G476- with fitted electrical
plug connectors up to the stop on the master cylinder.
• The clutch position sender must lock in place -arrow A-.
– For checking, pull at clutch position sender -arrow B-.
Continued for all vehicles
– Press in tube-hose line -3- onto the connection of the master
cylinder, until the locking clip -2- is heard to click into position.
– Fit return hose -1- on the master cylinder.
– For checking, pull on the line.
– Bleed the clutch control
– If removed, install the engine control unit at the front wall ⇒
Engine; Rep. gr. 23 or ⇒ Engine; Rep. gr. 24 .
– Install battery ⇒ Electrical System; Rep. gr. 27 .
– Install air filter housing ⇒ Engine; Rep. gr. 23 or ⇒ Engine;
Rep. gr. 24 .
40
⇒ page 31
⇒ page 32 .
⇒ page 65 .
.