Skoda Fabia II 2007 Workshop Manual page 123

♦ Thrust piece - T10085-
♦ Sealant - AMV 188 200 03-
Change gearbox holder -T30012-
Drill a new hole in the gearbox holder - T30012 (3221)- to attach
the Gearbox 02T.
Dimensions in mm.
– Drill a hole ∅ 11.0 mm -arrow-.
4.6.1 Removing
– Secure gearbox to the assembly stand -arrows-.
– Position catch pan underneath.
– Drain out gear oil.
– Remove the clutch release lever together with the release
bearing and guide bushing.
– Release screws -arrows-.
– Separate the clutch release lever together with the release
bearing and guide sleeve from the drive shaft and ball stud.
– Removing the right flange shaft.
– To this end insert two screws in the flange and counterhold the
flange shaft using a tyre iron.
– Pull out the flange shaft with pressure spring, stop disc and
conical ring.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
4. Disassembling and assembling the gearbox
119