Skoda Fabia II 2007 Workshop Manual page 152

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
Fitting position 3rd gear pinion and 4th gear pinion.
– Place the 4th gear pinion -A- on the output shaft.
Fitting position:
The collar -arrow 1- points towards the 3rd gear pinion -B-.
– Insert circlips -1- and -2-.
– Place the 3rd gear pinion -B- on the output shaft.
Fitting position:
The collar -arrow 2- points towards the 4th gear pinion -A-.
– Insert circlip -3-.
Check 1st and 2nd gear inner ring for wear
– Press the inner ring -2- on the cone of the sliding gear and
measure clearance -a- with a feeler gauge -1-.
1. and 2nd gear
Clearance -a-
Check 1st and 2nd gear synchronizer ring for wear
– Press the synchronizer ring, outer ring and inner ring on the
cone of the sliding gear and measure clearance -a- with a
feeler gauge -1-.
1. and 2nd gear
Clearance -a-
Fitting position of the inner ring, outer ring and 2nd gear syn‐
chronizer ring
– Position the inner ring -A- on the 2nd gear sliding gear.
The angled lands -arrow 1- point towards the outer ring -B-.
– Position the outer ring -B-.
Lock the lands -arrow 2- in the recesses -arrow 3- of the sliding
gear.
– Position the synchronizer ring -C-.
Lock the recesses -arrow 4- in the lands -arrow 1- of the inner
ring -A-.
148
Rep. gr.35 - Gears, shafts
Installation dimen‐
sion
0.75 to 1.25 mm
Installation dimen‐
sion
1.2 to 1.8 mm
Wear
limit
0.3 mm
Wear
limit
0.5 mm