Skoda Fabia II 2007 Workshop Manual page 150

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
14 - Sliding sleeve with 1st and 2nd gear synchronizer body
❑ press off together with 2nd gear sliding gear
❑ disassembling ⇒ page 149
❑ Assemble sliding sleeve/synchronizer body
❑ Fitting position ⇒ page 149
❑ pressing on ⇒ page 149
15 - Circlip
❑ pushing out ⇒ page 147
❑ inserting ⇒ page 150
16 - 1st gear synchronizer ring
❑ check for wear ⇒ page 148
❑ insert in such a way that the recesses lock into the arresters of the sliding sleeve -Pos. 14-
17 - Outer ring for 1st gear
❑ position in the synchronizer ring -Pos. 16-, fitting position
❑ replace if there are any traces of scoring or friction
18 - Inner ring for 1st gear
❑ check for wear ⇒ page 148
❑ Check pegs for traces of wear
❑ Fitting position ⇒ page 150
19 - Needle bearing
❑ 1. gear
20 - 1st gear sliding gear
❑ Fitting position ⇒ page 150
21 - Bearing support for grooved ball bearing
❑ Always replace grooved ball bearing together with the bearing support
❑ replace after each removal
❑ removing and installing
22 - Gearbox housing
❑ repairing ⇒ page 126
23 - 5th gear pinion
❑ Fitting position: collar points towards the cover of the gearbox housing
❑ removing and installing
24 - Circlip
❑ always replace ⇒ Electronic Catalogue of Original Parts
❑ Determine thickness
25 - Spring
❑ Fitting position ⇒ page 149
26 - Sliding sleeve
27 - Synchronizer body
28 - Arresters for synchronizer body
❑ (3 pieces)
146
Rep. gr.35 - Gears, shafts
⇒ page 149
and ⇒ page 149
⇒ page 135
⇒ page 115
⇒ page 115
⇒ page 147
and ⇒ page 149
⇒ page 150
⇒ page 115