Skoda Fabia II 2007 Workshop Manual page 133

Remove bushing for gasket ring
– Position the distance sleeve - MP3-458/2- and thrust piece -
MP3-484 (30-555)- on the differential gear.
A - Puller , e.g. -Kukko 18/1-
B - Separating device 12 to 75 mm , e.g. -Kukko 17/1-
Insert bushing for gasket ring
A - Threaded rod from assembly device - MP3-434 (3066)-
B - Nut M12 with washer
– Screw threaded rod from assembly device - MP3-434 (3066)-
into the threaded part of the differential gear.
– By turning the nut -B- install the bushing over the pressure
plate - MP3-420 (3124)- up to the stop.
Note
If the gearbox is disassembled press the bushing with pressure
plate - MP3-420 (3124)- up to the stop.
Remove the bushing -A- for the shiftgear shaft
Insert the bushing -A- for the shiftgear shaft
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
5. Repairing gearbox housing and clutch housing
129