Skoda Fabia II 2007 Workshop Manual page 153

Disassembling and assembling the sliding sleeve/1st and 2nd
gear synchronizer body
1 - Spring
2 - Sliding sleeve
3 - Synchronizer body
4 - Arresters for synchronizer body
– Slide the sliding sleeve over the synchronizer body.
Fitting position:
After assembly the groove on the front side -arrow A- and the
higher collar -arrow B- of the synchronizer body point towards the
outer serration of the sliding sleeve -arrow C-.
The deeper recesses -arrow D- of the arresters in the synchron‐
izer body and the recesses -arrow E- in the sliding sleeve must
be positioned above one another.
Assembling the sliding sleeve and 1st and 2nd gear synchronizer
body
• The sliding sleeve is drawn over the synchronizer body.
– Insert the arresters in the deeper recesses -arrows- and mount
the springs by turning them 120°.
The angled ends of the springs must grip into the recesses of
the arresters for the synchronizer body.
Press on the sliding sleeve/1st and 2nd gear synchronizer body
Fitting position:
The slot for the shift fork in the sliding sleeve points towards the
1st gear, the serration of the reversing gear points towards the
2nd gear.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
2. Output shaft
149