Skoda Fabia II 2007 Workshop Manual page 141

7 - Gearbox housing
8 - Bearing support for grooved ball bearing
❑ Always replace grooved ball bearing together with the bearing support
❑ If the bearing support is released from the gearbox housing, it must always be replaced
❑ pressing off ⇒ page 139
❑ pressing on ⇒ page 142
9 - Drive shaft
10 - Needle bearing
❑ for 3rd gear
❑ Assignment ⇒ Electronic Catalogue of Original Parts
11 - 3rd gear sliding gear
12 - 3rd gear synchronizer ring
❑ on gearboxes as of production date 06.09, the synchronizer ring for 3rd and 4th gear is changed ⇒
Electronic Catalogue of Original Parts
❑ check for wear ⇒ page 140
13 - Sliding sleeve with 3rd and 4th gear synchronizer body
❑ press off with 3rd gear sliding gear
❑ disassembling ⇒ page 140
❑ Fitting position sliding sleeve/synchronizer body
❑ Assemble sliding sleeve/synchronizer body
❑ pressing on ⇒ page 141
❑ on gearboxes as of production date 06.09, the springs (-Pos. 23-) are changed
14 - 4th gear synchronizer ring
❑ on gearboxes as of production date 06.09, the synchronizer ring for 3rd and 4th gear is changed ⇒
Electronic Catalogue of Original Parts
❑ check for wear ⇒ page 140
15 - 4th gear sliding gear
16 - Bushing
❑ for 4th gear needle bearing
❑ replace together with -Pos. 17-
❑ removing ⇒ page 139
❑ installing ⇒ page 139
❑ Assignment ⇒ Electronic Catalogue of Original Parts
17 - Needle bearing
❑ for 4th gear
❑ replace together with -Pos. 16-
❑ Assignment ⇒ Electronic Catalogue of Original Parts
18 - Thrust washer
19 - Inner ring
❑ for cylindrical-roller bearing
❑ pull off with 4th gear sliding gear
❑ pressing on ⇒ page 141
20 - Circlip
❑ always replace ⇒ Electronic Catalogue of Original Parts
❑ Determine thickness
21 - Cylindrical-roller bearing
❑ with circlip
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
⇒ page 139
⇒ page 139
⇒ page 141
Gearbox 02T - Edition 05.2014
⇒ page 140
⇒ page 140 and ⇒ page 140
137
1. Drive shaft