Skoda Fabia II 2007 Workshop Manual page 110

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
– Release the screws -arrows- and remove the fan shroud
downwards (on newer models, the screws are no longer
present and the fan shroud is only clipped in at the radiator,
see fig. N19-10333).
– Unclip the fan shroud e.g. using a screwdriver and remove ⇒
Engine; Rep. gr. 19 .
– Detach gearbox mounting bracket -A- from the gearbox.
Remove the fixing screws -arrows- for the gearbox mounting
bracket as follows:
– Lower engine/gearbox unit sufficiently at the two spindles until
the fixing screws attaching the gearbox mounting bracket -A-
are accessible from the left wheelhouse.
Note
When lowering the engine/gearbox unit, make sure the gearbox
does not touch the assembly carrier.
– Unscrew the engine/gearbox connecting screw above the right
flange shaft.
– Insert engine mount - 3282- into engine and gearbox jack , e.g.
-V.A.G 1383/A- .
Complete engine/gearbox jack with gearbox mount - 3282- , ad‐
justing plate - 3282/31- for gearbox "02T" and support elements:
– Position adjusting plate - 3282/31- on gearbox mount - 3282-
( adjusting plate fits in only one position).
– Align arms of the gearbox mount to match the holes in the
adjusting plate .
106