Replacing The Microsd Card - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

System board and components
▶ Install both microSD cards on the new Dual microSD 64GB Enterprise.
Proceed as described in the following:
Figure 335: Installing the microSD card
▶ With the label facing up, insert the microSD card into the microSD slot on
the controller (1) until it locks in place (2).
▶ Install the new Dual microSD 64GB Enterprise, see
microSD 64GB Enterprise" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see
configuration" on page
14.7.5

Replacing the microSD card

Upgrade and Repair Unit
(URU)
510
500.
68.
82.
83.
504.
Upgrade and Maintenance Manual
"Installing the Dual
Hardware: 5 minutes
"Software
TX2550 M5