Expansion cards and backup units
Figure 214: Removing the SFP+ transceiver module
▶ Pull the SFP+ transceiver module out of its socket connector.
▶ Attach the protective cap to the SFP+ transceiver module.
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
9.5
OCP (Open Compute Project) modules
9.5.1
Installing an OCP module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH1 / (+) No. 1 screw driver
338
Upgrade and Maintenance Manual
Hardware: 5 minutes
TX2550 M5