Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 263

Installing the 2.5-inch HDD bay top cover
▶ Install the 2.5-inch HDD bay top cover, see
top cover" on page
Installing the 16x 2.5-inch HDD front panel
Figure 158: Securing the 16x 2.5-inch HDD front panel
▶ Fit the three hooks on the 2.5-inch HDD front panel into the slots in the
server front (see small arrows).
▶ Firmly press down on the HDD front panel until its upper edge is flush with
the chassis (see arrow).
▶ Fasten the HDD front panel to the server front with four M3 x 4.5 mm screws
(see circles).
Installing the expander board
▶ Install the expander board, see
page 306.
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
262.
"Installing the SAS expander board" on
Upgrade and Maintenance Manual
"Installing the 2.5-inch HDD bay
263