Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 282

Hard disk drive (HDD) / solid state disk (SSD)
▶
"Disconnecting the power cord" on page
▶ Remove all HDD modules from the HDD extension box, see
inch HDD modules" on page
▶ If applicable, remove all dummy modules from the HDD extension box, see
"Removing a 2.5-inch HDD/SSD dummy module" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
▶ Remove the fan bridge, see
Removing the 4x 3.5-inch HDD extension box
▶ Remove all cables from the 4x 3.5-inch HDD extension box backplane.
▶ If applicable, remove all cables from the slimline ODD.
▶ Disengage the accessible drive locking bar, see
drive locking bar" on page
Figure 171: Removing the HDD extension box
282
179.
"Handling the fan bridge" on page
96.
Upgrade and Maintenance Manual
50.
51.
67.
"Opening the accessible
"Removing 3.5-
219.
92.
TX2550 M5