Upgrading To 2 Cpus Configuration - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Processor (CPU)
11.3

Upgrading to 2 CPUs configuration

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
▶
Never push a CPU over a surface.
CAUTION
▶
Only CPUs of the same type may be used on the system board.
That means the number of the internal CPU cores as well as the
primary clock and the QPI frequency have to be the same.
▶
For dual operation, use a suitable multiprocessor OS.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
412
49.
Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
107.
50.
51.
67.
TX2550 M5