Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 543

Figure 354: Installing accessible drive dummy covers
▶ If available, install all accessible drive dummy covers into their original
locations (rotated by 90 degrees):
▶ Ensure that an accessible drive filler cover has been installed in every
empty drive bay.
▶ Turn the rack front cover face down.
▶ Join the two lugs on one edge of the accessible drive cover with the right
inner edge of the front cover (1).
▶ Fold down the accessible drive cover until it snaps in place (2).
Use the dummy covers that have been removed from the front
cover during the preliminary steps.
▶ Install the rack front cover, see
TX2550 M5
Converting a floorstand model to a rack model
"Installing the rack front cover" on page
Upgrade and Maintenance Manual
69.
543