▶ Press the cable clamp down until it disengages (1).
▶ Open the cable clamp (2).
▶ Disconnect the power cord from the PSU and remove it from the cable
clamp.
4.4
Getting access to the component
4.4.1
Safety notes
CAUTION
▶
Only for non-hot plug components:
● Before removing or attaching covers, turn off the server, all
peripheral devices, and any other connected devices.
● Because there is a risk of electric shock or damage, please
disconnect all power cords from the outlet.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see
▶
Only valid for the floorstand model: Do not lift the server by the
front cover in order not to damage the locking clips.
TX2550 M5
"Important information" on page
Upgrade and Maintenance Manual
Basic hardware procedures
33.
51