Handling The Crossbar; Removing The Crossbar - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Basic hardware procedures
▶ Push the PCI air duct to the left as far as it will go so that the two shoulder
screw caps rest in the small ends of the keyhole slots.
4.10

Handling the crossbar

4.10.1

Removing the crossbar

Figure 43: Removing the crossbar
▶ Remove the three screws of the crossbar (see circles).
▶ Remove the crossbar.
90 Upgrade and Maintenance Manual TX2550 M5