Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 301

Hard disk drive (HDD) / solid state disk (SSD)
Installing a non-hot-plug HDD/SSD
Figure 185: Installing the non-hot-plug HDD/SSD
▶ Place the non-hot-plug HDD/SSD 1 in the non-hot-plug cage.
▶ Fasten the non-hot-plug HDD/SSD 1 with the four screws (two screws on
each side, circles show one side).
▶ If applicable, install the non-hot-plug HDD/SSD 2 in the same way.
TX2550 M5 Upgrade and Maintenance Manual 301