Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 352

Expansion cards and backup units
Figure 226: Installing two Retimer controllers
▶ Install one Retimer controller in slot 8 (1).
▶ Install the other Retimer controller in slot 9 (2).
▶ Connect the VPP cable to the connector "VPP CPU2" on the system board
(see close-up 3).
▶ If applicable, connect an FBU to the expansion card, see
FBU" on page
352
380.
Upgrade and Maintenance Manual
"Installing an
TX2550 M5