Converting a floorstand model to a rack model
Concluding steps
▶
"Installing the top cover" on page 70
▶ Install the support bracket and rack mounting rails in the rack, see the "Rack
Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
The document is available online.
▶
"Installing the server in the rack" on page
▶ Connect all external cables.
▶
"Connecting the power cord" on page 82
▶
"Switching on the server" on page 83
▶ Update the chassis information of your server on the Chassis ID EPROM
integrated into the front panel board. For more information on how to obtain
and use the ChassisId_Prom Tool, see
on page
136.
▶ Change the chassis model setting to "rack model", see
chassis model" on page
544
"Using the Chassis ID Prom Tool"
141.
Upgrade and Maintenance Manual
72.
"Specifying the
TX2550 M5