Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 284

Hard disk drive (HDD) / solid state disk (SSD)
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all HDD modules from the HDD extension box, see
inch HDD modules" on page
▶ If applicable, remove all dummy modules from the HDD extension box, see
"Removing a 3.5-inch HDD dummy module" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
▶ Remove the fan bridge, see
Removing the defective HDD backplane
▶ Unlock and pull the 4x 3.5-inch HDD extension box out of its installation
bays, see "Removing the 4x 3.5-inch HDD extension box" on page
284
49.
179.
"Handling the fan bridge" on page
Upgrade and Maintenance Manual
50.
178.
51.
67.
"Removing 3.5-
92.
281.
TX2550 M5