Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 272

Hard disk drive (HDD) / solid state disk (SSD)
Tools: tool-less
After installing or removing an extension box, never forget to change the
system information using the Chassis ID Prom Tool.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all HDD/SSD modules, see
modules" on page
▶ If applicable, remove all dummy modules, see
SSD dummy module" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
▶ Remove the fan bridge, see
Removing the 8x 2.5-inch HDD/SSD extension box
▶ Remove all cables from the 8x 2.5-inch HDD/SSD extension box backplane.
▶ Disengage the accessible drive locking bar, see
drive locking bar" on page
272
49.
220.
219.
"Handling the fan bridge" on page
96.
Upgrade and Maintenance Manual
107.
50.
"Removing 2.5-inch HDD/SSD
"Removing a 2.5-inch HDD/
51.
67.
"Opening the accessible
92.
TX2550 M5