Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 579

iRMC-related status signals
ID indicator
flashing blue
flashing blue
For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY TX2550 M5
Upgrade and Maintenance Manual".
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
TX2550 M5
Global error
indicator
off
flashing orange An emergency flash of the iRMC firmware
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
is in progress.
Appendix A
579