Replacing A 2.5-Inch Hdd/Ssd Module - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Concluding steps
▶ When working on a floorstand model, close the HDD bay cover, see
"Installing the accessible drive bay cover" on page
7.5.5

Replacing a 2.5-inch HDD/SSD module

Customer Replaceable
Unit (CRU)
Tools: Phillips PH1 / (+) No. 1 screw driver (for installation frame)
PCIe SSDs SFF are installed in the same frames as the 2.5-inch
HDD/SSD modules. Therefore, this section is also valid and applicable if
PCIe SSDs SFF are used.
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
Upgrade and Maintenance Manual
78.
Hardware: 5 minutes
223