Upgrading To 4 Cpu Configuration - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

Processor (CPU)
CPU population requirements
– CPU1 and CPU2 must be populated first as minimum CPU population rule.
– All CPUs must be of the same type.
– All CPUs MUST operate at the same Intel® Ultra Path Interconnect
frequency and core frequency.
– Mixing CPUs with different core count is not supportedsupported, e.g.
mixing 8-core and 6-core.
– Mixing CPUs with different shared cache size is not supported, e.g. mixing
20 Mbyte and 15 Mbyte.
– Mixing CPUs with different power class is not supported, e.g. mixing 135-
watt and 95-watt.
– Mixing CPUs of different stepping is not supported.
For system relevant information, see the hardware configurator of your
server available online at the following address:
https://ts.fujitsu.com/products/standard_servers/index.htm
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
11.3

Upgrading to 4 CPU configuration

Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– Torx 30 screw driver (for CPU heatsink)
258 Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
RX4770 M6