Upgrading Configuration From Up To Four To Up To Eight 2.5-Inch Hdds/Ssds - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
7.5.8 Upgrading configuration from up to four to up to
eight 2.5-inch HDDs/SSDs
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
CAUTION
All data on all HDDs/SSDs in the array will be lost when deleting the
RAID array!
▶
Be sure to back up your data before deleting a RAID array.
▶
For more information, see the "ServerView Suite RAID
Management" user guide.
After installing or removing an additional backplane, never forget to
change the system information using the Chassis ID Prom Tool.
Preliminary steps
The HDD backplane is mounted on the HDD cage. It is not necessary to
remove the HDD cage before installing or removing the HDD backplane.
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the HDD fan modules, see
inch HDD variant)" on page
166
54.
57.
60.
45.
"Removing the HDD fan module (2.5-
67.
Upgrade and Maintenance Manual
Hardware: 10 minutes
46.
48.
TX1320 M5