Identification Commands; Initialization Commands - TDK-Lambda GH10-100 User Manual

4.10.4

Identification Commands

IDN?
Query
Returns
Example
REV?
Query
Returns
Example
SN?
Query
Returns
Example
DATE?
Query
Returns
Example
4.10.5

Initialization Commands

CLS
Function
Returns
ADR <NR1>
Function
Returns
RMT <DSC>
Function
Parameters
Query
Returns
Returns the power supply model identification as an ASCII string (one comma,
no spaces)
<SRD>
TDK-LAMBDA,G100-50
Returns the software version as an ASCII string
<SRD>
G:XX.XXX
Returns the supply's serial number. Up to 12 characters in any format
<SRD>
111111-22222
Returns the date of last calibration. Format: yyyy/mm/dd
<SRD>
2017/12/17
Clear Status. Sets FEVE and SEVE registers to zeroes
<DSC> OK
Send 'ADR' and address (0 to 31) to open a communication channel.
<DSC> OK
Set the power supply control source (front panel or communication) to local,
remote or LLO mode.
Local – Enable front panel control.
Remote – Disable front panel settings change (settings preview only).
LLO – same as Remote + Disable front panel unlock function by front panel.
Change mode by communication or AC recycle.
0|1|2 or LOC|REM|LLO
RMT?
<DSC> LOC|REM|LLO
85