Table of Contents
Advertisement
Rear Panel features
•
Ethernet RJ-45 connector (standard 8-pin phone jack for LAN)
Link, Activity LED and Speed LED on RJ-45 connector
•
•
LAN Status LEDs show LAN fault and "Blink Identify" on rear panel, close to LAN RJ-45
connector
RS-485 Multi-drop Chain
•
Allows connection of up to
One LAN IP address shared by all RS-485 power supplies.
•
Trademark Notices
Microsoft, Internet Explorer and Windows are trademarks of Microsoft Corporation.
Windows Telnet application is not supported, as characters are sent as these are typed.
power supply Telnet supports only strings (characters sent in a complete packet with
Carriage Return or Line Feed characters as a terminator).
4.7.2
Specifications
4.7.2.1
LAN Specifications
ELECTRICAL
Ethernet
Auto-MDIX
Auto-Negotiate
NETWORK CONFIGURATION
MAC Address
IP Address
DHCP
Auto-IP
Static IP
Address
Resolution
Hostname
Service Name
Duplicate IP
Detection
Subnet Mask
31
power supplies using simple Link cable.
NOTE
Meets IEEE 802.3u specifications
Accepts patch or cross-over cable connection
Selects fastest of 10Base-T or 100Base-T networks
(10 or 100 Megabits per second)
TDK-Lambda assigned: 00:19:f9:xx:xx:xx
xx:xx:xx is the unique address for each unit
View or set from the Front Panel or embedded web page
Receive an address from network server. Leasing services
Create its own IP address: 169.254.xxx.xxx
Any IP fixed by an operator
ARP Protocol
DNS and mDNS protocols. Operator settable hostname
DNS-SD Service Discovery Protocol
Reject duplicate setting or disconnect from network
Mask set by DHCP or static
57
Advertisement
Table of Contents
