Table of Contents
Advertisement
SYSTem:TEMPerature[:AMBient]?
Query
Unit
Return
Example
SYSTem:VERSion?
Query
Return
4.14.11
TRIGger Subsystem
The Trigger subsystem must be enabled from the Initiate subsystem. If disabled, commands from
the trigger subsystem will not affect power supply output.
TRIGger[:IMMediate]
Function
TRIGger:DELay <NRf+>
Function
Parameters
Unit
Query
Return
The TRIGger command overrides TRIGger:DELay. It activates trigger immediately.
TRIGger:SOURce <DSC>
Function
Parameters
Query
Return
Returns ambient temperature
ºC
<NR1>
25
Returns SCPI language version
<SRD> 1999.0
NOTE
If Trigger is enabled (by INITiate command), TRIG generates an
immediate trigger signal.
Sets a time delay between trigger events of a specified trigger source to the
start of any corresponding trigger action over the power supply output.
0.000...10.000s
Step:0.001 Sec.
S
TRIGger:DELay?; TRIGger:DELay? MIN;
<NR2>
NOTE
Selects a trigger source:
•
BUS - *TRG or TRIG commands and Front Panel.
EXT – Rear Panel Trigger IN pin (J1-22).
•
BUS|EXT
TRIGger:SOURce?
<DSC> BUS|EXT
TRIGger:DELay? MAX
126
Advertisement
Table of Contents
